CRU PUMPS - U SERIES
Amarinth U Series CRU pumps are specifically designed and manufactured for condensate applications. The pumps are typically found in general industrial applications such a building services or hospitals. U Series CRU pumps are designed for low NPSH to reduce the overall CRU footprint and all have independently verified, full ATEX compliance.
The U Series CRU pumps are designed to be fully interchangeable with a Girdlestone URF or USM pump. Amarinth’s U Series CRU pump has identical termination points (i.e. suction & discharge flange positions) to the Girdlestone equivalent pump meaning there are no issues changing pipework when you replace your existing pump. The U Series CRU pump will simply slot straight in to the space left by the original.Download Brochure
Amarinth U Series CRU pumps can be fitted with fixed or variable speed drivers from any manufacturer. The overall U Series CRU hydraulic coverage chart is shown on the left. More detailed hydraulic coverage charts list individual pump designations at 2 pole & 4 pole speeds. Specific duty curves will be provided with all quotations.
Use the slider at the bottom of the images to select the hydraulic coverage chart you're interested in & then launch the relevant pdf to review the coverage charts in more detail.
Drawings & Visualisations
A number of images in various pump configurations are provided to help you visualise our U Series CRU product including:
- Isometric view
- Exploded view
- General arrangement
- Sectional arrangement
Select an image below using the slider at the bottom and then launch the relevant PDF.
A range of single stage centrifugal end suction pumps with tangential discharge manufactured in a variety of alloys. All pumps and individual components are fully interchangeable with the equivalent Girdlestone URF / USM series units.
Back pullout design with machined abutments
Advanced computer techniques including 3D modelling, FEA & CFD
ATEX EC-Directive 94/9/EC (close coupled versions only)
|Design pressure rating||
10 bar g @ 20°C
|Suction pressure rating||
6 bar g (long coupled)
-10°C to 200°C (long coupled)
150°C (standard construction)
Up to 500m³/h
Up to 165m
Up to 3600 rpm
Long coupled pump
050x040x159 to 150x125x274
15 years (2 years uninterrupted operation)
Amarinth U Series CRU pumps are available in a variety of materials as standard which include the following pump / impeller combinations.
|Cast Iron / Gunmetal||BS EN 1561 Gr EN-GJL-250||BS EN 1982 CC492K GS|